Hollow Out Non - Mechanical Watch Initial Quartz Watch Automatic Quartz Watch
Introduction
The hollow shape is used as the material, and the texture of the diamond-shaped faceted table mirror of the watch is expressed with fashionable machinery to create a watch with visual impact. The overall look is fashionable and cool.
Basic parameters
| Inner packing | PP bag+bubble bag |
| outer packing | carton |
| dimensions | 50*27*28cm |
| MOQ | 500pc |
| Port | ShenZhen/HK |
| Lead Time: |
| Quantity(Pieces) | 1 - 10000 | >10000 |
| Est. Time(days) | 40 | To be negotiated |
| Table mirror: | mineral high definition table mirror |
| Watchband: | stainless steel watchband |
| Table buckle: | folding buckle |
Features
1. Fashionable hollow dial, mechanical style, fashionable and dazzling shape, showing unique charm
2. Original quartz movement, with fashionable mechanical gear design, accurate timekeeping, stable performance and higher precision
3. Exquisitely carved bottom cover, cool mechanical style, luxurious rhythm, different temperament
4. Mineral-strengthened glass mirror, high-definition visibility, wear-resistant and scratch-resistant
5.3 ATM life waterproof, meeting the waterproof problems of daily face washing and hand washing
6. Luminous pointer display, allowing you to easily grasp the time even in the dark
Picture
How to wind a non-automatic watch
Regardless of whether it is an automatic mechanical watch or a manual mechanical watch, the winding of all mechanical watches obeys one rule: turn the surface upwards and face the front at 12 o'clock. At this time, the crown is usually in the right hand. Rotating the crown from the bottom to the top is the winding. Automatic Mechanical watches can also be wound in this way. To
If you confirm that your watch is guarded in this way, and you won’t go when it is fully loaded, and turn it in the opposite direction for a few times, it should be because you are winding too slowly. If the winding is too tight, it will cause the mainspring to jam and the watch will not move. Now, don’t screw it hard next time until it can’t be screwed. To
If it's not that you screwed it too tightly, or that is the case, there is a problem with the watch barrel and it needs to be repaired. To
